Sensitivity of veliger larvae of Mytilus edulis and mussel of various sizes to chlorination

The blue mussel Mytilus edulis is one of the dominant fouling organisms in cooling water systems. In this work, how veliger larvae and different size groups of the mussels responded against chlorine dosage was examined. Veliger larvae mortality was studied at different residual chlorine concentrations (0.05–0.5 mg L^?1), and it was found that a chlorine dose of 0.5 mg L^?1 is 4 times as effective as 0.05 mg L^?1 and twice as effective as 0.1 mg L^?1. Mortality of 100% for three size groups (1.4, 14, and 25 mm) and relative physiological activities of two size groups (14 and 25 mm) were observed. The exposure duration for 100% mortality of mussels decreased with the increasing residual chlorine concentration (0.1–4.0 mg L^?1). Mussel size was also found to be an important factor, considering that the continuation times for mussel mortality were 28 h for the 1.4 mm and 410 h for the 25 mm size groups. All size groups showed progressive reduction in physiological activities, such as oxygen consumption, foot activity, and byssus thread production with increasing chlorine dose (0.05–1.0 mg L^?1); the two data-sets were strongly correlated with each other. The results of this study should be of significance for optimizing the chlorine content, and minimize the environmental threat to industries where mussels are the dominant fouling organisms.     

Exposure assessment and associated lung deposition calculations for vehicular exhaust in four metropolitan cities of Pakistan

Ambient aerosol concentrations along the roadside of metropolitan cities of Pakistan were measured using a Grimm 1.109 dust monitor. Considering the high ambient aerosol concentrations, regional lung deposition of aerosol particles in the human respiratory tract was calculated to assess extent of exposure. Lung deposition was computed in terms of mass concentration and the associated surface area for 12 male traffic wardens using the latest version of the stochastic lung deposition code Inhalation, Deposition, and Exhalation of Aerosols in the Lung. The results have revealed 4 to 10 times higher concentrations than recommended by WHO guidelines. The deposition results derived from the model disclose that extrathoracic deposition is in the range of 22 to 28 % with total lung deposition ranging from 40 to 44 % for the scanned particle window of 0.25–10 μm. Considering an average 8-h shift per day and an average breathing rate of 1.3 m³?h^?1, it is approximated that in a worker, up to 1.6 mg of inhalable particle mass can deposit per day.     

An improved method to study the impact of pesticide sprays on small song birds

Abstract

Four test groups of small songbirds (Zebra Finch, Poephila guttata) were sprayed in a chamber with varying concentrations of fenitrothion. Exposure levels were assessed by monitoring air concentrations, deposits of the active ingredient (AI) on glass plates and droplets/cm² on Kromekote® cards. All indices of exposure were linearly correlated and the mean AI deposit on glass plates for the four groups tested were equivalent to 38, 51, 139 and 255 g/ha or 14%, 18%, 50% and 91% of the highest permissible emitted rate for broadscale forest spraying in Canada. Significant depression in body weights and brain acetylcholinesterase levels were noted only for the highest exposure group. Fenitrothion residues in blood were detectable only at the highest exposure level, and in liver at the two higher levels. Carcass and feather residues were much higher than those in blood and liver, and were detectable at all exposure levels but the residues did not increase linearly with exposure. For one of the spray groups, we were able to compute an equivalent acute oral dose based on matching acetylcholinesterase inhibition.     

Utilization of Cellulosic Wastes in Textile and Garment Industries: 2. Synthesis and Characterization of Cellulose Acetate from Knitted Rag

Cellulose acetate (CA) was synthesized from knitted rag, a cellulosic waste of Textile and Garment industries, in the glacial acetic acid, and subsequently acetic anhydride (Ac₂O) in presence of concentrated H₂SO₄ reaction medium. A low to high substitution products were obtained from single step up to seven steps acetylation of cellulose. In this way, it was possible to produce low cost and different grades or substituted acetylation derivatives of cellulose. The synthesized CA was characterized and investigation of its physical characteristics was done. Solubility, acetyl content, acetic acid content, degree of substitution, and molecular weight of CA increased gradually with the increase of the number of reaction steps attaining optimum value at the fourth step. The acetyl and acetic acid content of CA were increased from 39.95 % to 44.25 %, and from 55.73 % to 61.73 % respectively. Similarly, degree of substitution and molecular weight of CA were increased from 2.47 to 2.94, and from 74,249 to 121,437 respectively.     

A GFP-based bacterial biosensor with chromosomally integrated sensing cassette for quantitative detection of Hg(II) in environment

A mercury biosensor was constructed by integrating biosensor genetic elements into E. coli JM109 chromosome in a single copy number, using the attP/attB recombination mechanism of λphage. The genetic elements used include a regulatory protein gene (merR) along with operator/promoter (O/P) derived from the mercury resistance operon from pDU1358 plasmid of Serratia marcescens. The expression of reporter gene gfp is also controlled by merR/O/P. Integration of the construct into the chromosome was done to increase the stability and precision of the biosensor. This biosensor could detect Hg(II) ions in the concentration range of 100-1700 nmol/L, and manifest the result as the expression of GFP. The GFP expression was significantly different (P ≤ 0.05) for each concentration of inducing Hg(II) ions in the detection range, which reduces the chances of misinterpretation of results. A model using regression method was also derived for the quantification of the concentration of Hg(II) in water samples.     

Metal contamination of drinking water from corrosion of distribution pipes

The objectives of this study were to evaluate metal contamination of drinking water resulting from the corrosion of distribution pipes and its significance to human health. A community in Dhahran, which is served from its own desalination facilities, was chosen for this study. About 150 drinking water samples were collected and analyzed for metal concentrations using an inductively coupled argon plasma analyzer. It was found that copper, iron and zinc in the drinking water increased during its transportation from the desalination plant to the consumers. This increase was related to the length and material of distribution pipes. Concentrations of copper and zinc were increased during overnight storage of water in the appliances. Metal concentrations found in this study are discussed with reference to human health.     

Mobilization of arsenic in groundwater of Bangladesh: evidence from an incubation study

The extensive extraction of arsenic (As)-contaminated groundwaters for drinking, household and agricultural purposes represents a serious health concern in many districts of Bangladesh. This laboratory-based incubation study investigated the sources and mechanisms of As mobilization in these groundwaters. Several incubation studies were carried out using sediments collected from the Bangladesh aquifer that were supplemented, or not, with different nutrients, followed by an analysis of the sediment suspensions for pH, ORP (oxidation-reduction potential), EC (electrical conductivity) and As and Fe(ΙΙ) concentrations. In the substrate-amended sediment suspensions incubated under anaerobic environment, there was a mobilization of As (maximum: 50–67 μg/l) and Fe(ΙΙ) (maximum: 182 μg/l), while the ORP value decreased immediately and drastically (as much as −468 mV to −560 mV) within 5–6 days. In the sediment suspensions incubated under control and aerobic conditions, no significant As mobilization occurred. The simultaneous mobilization of As and Fe(ΙΙ) from sediments is a strong indication that their mobilization resulted from the reduction of Fe oxyhydroxide by the enhanced activity of indigenous bacteria present in the sediments; this phenomenon also provides insights on the mobilization mechanism of As in groundwater. The concentrations of As in the sediments used in the incubation studies were strongly linked to the gradients of redox potential development that was stimulated by the quantity of organic nutrient (glucose) used. The penetration of surface-derived organic matter into the shallow aquifer may stimulate the activity of microbial communities, thereby leading to a reduction of iron oxyhydroxide and As release.     

Gasification characteristics of biomass for tar removal by secondary oxidant injection

Gasification experiments for sawdust were conducted using a fixed bed reactor at 900 °C by varying the secondary oxidant injection ratio to determine the optimal conditions for tar removal along with the enhancement of gasification efficiency. Secondary oxidant was injected as an oxidant at the top zone of the gasifier in varying ratios of 10–30% of the total amount of oxidant. This method was based on the primary method of tar removal and gasification efficiency improvement by thermal cracking of tar. Various gasification performance parameters were evaluated and tar content was estimated by measuring the fluctuation of weight of the activated carbon filter. The results showed that the concentration of tar in the producer gas decreased by injecting the secondary oxidant, even though syngas yield decreased. The recycling potential of the char produced in the gasification experiments was also assessed with the purpose of utilizing char as an adsorbent by determining its surface area and pore volume. The results demonstrated that the char produced from the gasification experiment had similar quality to that of the activated carbon used in this experiment.     

Study of two species prey-predator model in imprecise environment with MSY policy under different harvesting scenario

Parameters involve in various ecological models are mostly uncertain due to ever changing characteristic of nature. This article, deals with a basic predator–prey model where ecological parameters are considered as parametric-functional nature of interval numbers. The dynamical behaviors of the model system have been discussed in the imprecise environment. Moreover, the concept of maximum sustainable yield (MSY) has been incorporated in the model system under imprecise environment, and MSY policies under different harvesting scenarios have been discussed. Finally all the analytical findings are testified through extensive numerical simulations and the article ended with a conclusion.